The Operator Panel - Dell 1355 Color Laser User Manual

Assigning an IP address that is already in use can cause network performance
issues.
NOTE:
Assigning an IP address is considered as an advanced function and is
normally done by a system administrator.
NOTE:
Depending on the address class, the range of the IP address assigned may
be different. On Class A, for example, an IP address in the range from
127.255.255.255
your system administrator.
You can assign the IP address by using the operator panel or using the tool
box.

The Operator Panel

For more information on using your operator panel, see "Operator Panel" on
page 223.
1 Turn on the printer.
Ensure that Ready message appears on the LCD panel.
2 Press the
3 Press the
button.
4 Press the
the button.
5 Press the
button.
6 Press the
button.
7 Press the
button.
8 Ensure that Get IP Address is highlighted, and then press the
button.
9 Ensure that Panel is highlighted, and then press the
10 Ensure that Get IP Address is highlighted.
11 Press the
the button.
54
Setting the IP Address
will be assigned. For assignment of IP addresses, contact
(Menu) button.
button until System is highlighted, and then press the
button until Admin Menu is highlighted, and then press
button until Network is highlighted, and then press the
button until TCP/IP is highlighted, and then press the
button until IPv4 is highlighted, and then press the
button until IP Address is highlighted, and then press
to
0.0.0.0
button.