To clear the settings, use the AC (All Clear) button.
3 Press the
NOTE:
Press the
scanning a document.
Setting Copy Options
Set the following options for the current copy job before pressing the
(Start) button to make copies.
NOTE:
The copy options automatically return to their default status after copying.
Number of Copies
To specify the number of copies from 1 to 99.
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the
document cover.
For details about loading a document, see "Loading an Original Document
on the ADF" on page 296.
2 Press the
3 Enter the number of copies using the numeric keypad to select the desired
value.
4 Press the
Color
To select mode for color or black and white copying.
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the
document cover.
For details about loading a document, see "Loading an Original Document
on the ADF" on page 296.
238
Copying
(Start) button to begin copying.
(Cancel) button to cancel a copy job at any time while
(Copy) button.
(Start) button to begin copying.