Dell 1355 Color Laser User Manual page 156

Auto Receive
Answer/Fax
Line Monitor
Ring Tone
Volume
Line Type
Tone/Pulse
Resend Delay
Redial Attempts Specifies the number of redial attempts to make when the
Redial Delay
Junk Fax Setup
Remote Receive
Remote Receive
Tone
Fax Header
Fax Header
Name
Fax Number
Fax Cover Page
DRPD Pattern
Sent Fax Forward Sets whether to forward incoming faxes to a specified destination.
Fax Forward
Number
154
Dell Printer Configuration Web Tool
Sets the interval at which the printer goes into the fax receive
mode after the external answering machine receives an incoming
call.
Sets the volume of the line monitor, which audibly monitors a
transmission through the internal speaker until a connection is
made.
Sets the volume of the ring tone, which indicates that an
incoming call is a telephone call through the internal speaker
when Receive Mode is set to Telephone/Fax.
Sets the line type.
Sets the dialing type.
Specifies the interval between transmission attempts.
destination fax number is busy. If you enter 0, the printer will not
redial.
Specifies the interval between redial attempts.
Sets whether to reject faxes sent from unwanted numbers by
accepting faxes only from the fax numbers registered in the Phone
Book.
Sets whether to receive a fax by pressing a remote receive code on
the external telephone.
Specifies the remote receive code in two digits to start Remote
Receive.
Sets whether to print the information of sender on the header of
faxes.
Sets the name of sender to be printed on the header of faxes. Up
to 30 alphanumeric characters can be entered.
Sets the fax number of the printer to be printed on the header of
faxes.
Sets whether to attach a cover page to faxes.
Sets the DRPD setting from Pattern 1 to Pattern 7. DRPD is a
service provided by some telephone companies.
Specifies the fax number of the destination to which incoming
faxes will be forwarded.