Dell 1355 Color Laser User Manual page 155

Fax Settings
Purpose:
To configure the basic fax settings.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
Values:
Receive Mode
Auto Receive Fax Sets the interval at which the printer goes into the fax receive
Auto Receive
Tel/Fax
Telephone Automatic fax reception is turned off. You can
receive a fax by picking up the handset of the
external telephone, pressing the remote receive code,
and then pressing .
Fax* Automatically receives faxes.
Telephone/ When the printer receives an incoming fax, the
Fax external telephone rings for the time specified in
Auto Receive Fax/Tel, and then the printer
automatically receives a fax. If an incoming call is not
a fax, the printer beeps from the internal speaker
indicating that the call is a telephone call.
Answer The printer can share a telephone line with an
Machine/ answering machine. In this mode, the printer will
Fax monitor the fax signal and pick up the line if there
are fax tones. If the phone communication is using
serial transmission in your country (such as Germany,
Sweden, Denmark, Austria, Belgium, Italy, France
and Switzerland), this mode is not supported.
DRPD Before using the Distinctive Ring Pattern Detection
(DRPD) option, a distinctive ring service must be
installed on your telephone line by the telephone
company. After the telephone company has provided
a separate number for faxing with a distinctive ring
pattern, configure the fax setup to monitor for that
specific ring pattern.
mode after receiving an incoming call.
Sets the interval at which the printer goes into the fax receive
mode after the external telephone receives an incoming call.
Dell Printer Configuration Web Tool
153