Tone*
Pulse(10PPS)
Pulse(20PPS)
Resend Delay
Purpose:
To specify the interval between transmission attempts within the range of 3 to
255 seconds. The default is 8 seconds.
Redial Attempts
Purpose:
To specify the number of redial attempts to make when the destination fax
number is busy, within the range of 0 to 9. If you enter 0, the printer will not
redial. The default is 3.
Redial Delay
Purpose:
To specify the interval between redial attempts within the range of 1 to 15
minutes. The default is 1 minute.
Junk Fax Setup
Purpose:
To reject faxes sent from unwanted numbers by accepting faxes only from the
fax numbers registered in the Phone Book.
Off*
On
NOTE:
Ensure to specify
Remote Receive
Purpose:
384
Understanding the Printer Menus
Sets the dialing type to
Sets the dialing type to Pulse (10 pulse per second).
Sets the dialing type to Pulse (20 pulse per second).
Does not reject faxes sent from unwanted numbers.
Rejects faxes sent from unwanted numbers.
Fax Number
.
Tone
before using
Junk Fax Setup
.