Upc-A - Honeywell 1602-B User Manual

UPC-A

UPC-A On/Off
Note: To convert UPC-A bar codes to EAN-13, see
UPC-A Check Digit
This selection allows you to specify whether the check digit should be transmitted at the end of the scanned data or not.
Default = On.
UPC-A Number System
The numeric system digit of a U.P.C. symbol is normally transmitted at the beginning of the scanned data, but the unit can
be programmed so it will not transmit it. Default = On.
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.
<Default All UPC-A Settings>
* On
* On
* On
Convert UPC-A to EAN-13 on page 7-24.
Off
Off
Off
7 - 19