Corded Usb Serial - Honeywell 1602-B User Manual

Corded USB Serial

Scan the following code to program the corded scanner to emulate a regular RS232-based COM Port, then power cycle the
host. If you are using a Microsoft® Windows® PC, you will need to download a driver from the Honeywell website
(www.honeywellaidc.com). The driver will use the next available COM Port number. Apple® Macintosh computers recog-
nize the scanner as a USB CDC class device and automatically use a class driver.
Note: No extra configuration (e.g., baud rate) is necessary.
Corded CTS/RTS Emulation
Corded CTS/RTS Emulation On
Corded ACK/NAK Mode
Corded ACK/NAK Mode On
2 - 24
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.
Corded USB Serial
* Corded CTS/RTS Emulation
Off
* Corded ACK/NAK Mode Off