Scanner Address; Linked Modes; Locked Link Mode - Single Scanner; Open Link Mode - Single Scanner - Honeywell 1602-B User Manual

Wireless area-imaging pocket scanner

Table of Contents

Scanner Address

Scan the bar code below to determine the address of the scanner you are using.

Locked Link Mode and Open Link Mode are the link modes that accommodate different applications. Scan the appropriate bar

codes included in the Open Link and Locked Link Mode explanations that follow to switch from one mode to another. Default =

Open Link Mode.

When you scan the bar code below, only the linked scanner can connect to the host and other scanners are blocked from

being linked to that host.

To use a different scanner, you need to unlink the original scanner by scanning the Unlink Scanner bar code. (See

Unlinking the

When in Open Link - Single Scanner Mode, each time a scanner is paired with a host, the scanner becomes linked to the

host and the old scanner is unlinked.

If a host has a scanner linked to it, that scanner must be unlinked before a new scanner can be linked. Once the previous

scanner is unlinked, it will no longer communicate with the host. To unlink the scanner from a host, scan the Unlink Scan-

ner bar code below.

The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.

Scanner, below.)

Scanner Address

Locked Link Mode

(Single Scanner)

* Open Link Mode

(Single Scanner)

Unlink Scanner

3 - 7

Table of Contents

Voyager 1602g