Upc-A - Honeywell Voyager 147 Series User Manual

UPC-A

UPC-A On/Off
Note: To convert UPC-A barcodes to EAN-13, see
UPC-A Check Digit
This selection allows you to specify whether the check digit should be transmitted
at the end of the scanned data or not. Default = On.
UPC-A Number System
The numeric system digit of a U.P.C. symbol is normally transmitted at the begin-
ning of the scanned data, but the unit can be programmed so it will not transmit it.
Default = On.
132
<Default All UPC-A Settings>
* On
* On
* On
Convert UPC-A to EAN-13
Voyager XP User Guide
Off
on page 138.
Off