Battery Charge Status; Flashlight Mode - Honeywell 1602-B User Manual

Battery Charge Status

If you want the battery indicator LED to flash in a pattern that indicates the battery charge level, scan one of the following
bar codes.
Battery Charge Status On -
Short Press
The battery LED flashes in the following patterns after a short or long press of the programmable button:

Flashlight Mode

If you want the scanner to act as a flashlight, scan one of the bar codes below. Pressing the programmable button (short or
long press) turns the flashlight on. Pressing the scan button turns it back off.
Flashlight Mode On -
Short Press
4 - 2
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.
Battery LED
LED Indicator
Orange flash
Orange, blink once
Orange, blink twice
Orange, blink three times
Green, on
Red, on
Red blink
Battery Charge Status On -
Long Press
Battery Charge Status
Battery is charging
Battery is 25–49%
Battery is 50–74%
Battery is 75–99%
Battery is fully charged
Low battery 0-24%
Charging error
Flashlight Mode On -
Long Press