Power Up Beeper; Beep On Bel Character; Trigger Click - Honeywell 1602-B User Manual

Power Up Beeper

The scanner can be programmed to beep when it's powered up. Scan the Off bar code(s) if you don't want a power up beep.
Default = Power Up Beeper On.
Power Up Beeper Off
* Power Up Beeper On

Beep on BEL Character

You may wish to force the scanner to beep upon a command sent from the host. If you scan the Beep on BEL On bar code
below, the scanner will beep every time a BEL character is received from the host. Default = Beep on BEL Off.
*Beep on BEL Off
Beep on BEL On

Trigger Click

To hear an audible click every time the scanner button is pressed, scan the Trigger Click On bar code below. Scan the Trigger
Click Off code if you don't wish to hear the click. (This feature has no effect on serial or automatic triggering.) Default = Trigger
Click Off.
*Trigger Click Off
Trigger Click On
4 - 4
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.