Batch Mode - Honeywell 1602-B User Manual

High (4200 Hz)

Batch Mode

Batch mode is used to store bar code data when a scanner is out of range of its host, or when performing inventory. The scan-
ner may store a number of symbols (approximately 500 U.P.C. symbols; others may vary) when it is out of range and then send
them to the host when back in range or when the records are manually transmitted.
Note: Batch mode has limitations when using multiple scanners with one Access Point. When a wireless system is being used
in "multiple link mode," where up to 7 scanners are connected to one Access Point, some accumulated or batched scans
could be lost if scanners are constantly moved in and out of range.
Automatic Batch Mode stores bar code data when the scanner is out of range of the host or Access Point. The data is auto-
matically transmitted to the host or Access Point once the scanner is back in range. When the scanner's buffer space is full, any
bar codes scanned generate an error tone. In order to scan bar codes again, the scanner must be moved back into range of the
host or Access Point so data can be transmitted.
Inventory Batch Mode stores bar code data, whether or not you are in range of the host or Access Point. To transmit the
stored data to the host or Access Point, scan
any bar codes scanned generate an error tone. In order to scan bar codes again, the data must be transmitted to the host or
Access Point. Once the data is transmitted, it is cleared in the scanner.
Persistent Batch Mode is the same as Inventory Batch Mode, except that once the data is transmitted to the host or Access
Point, it is retained in the scanner. If you want to transmit more than once, you can do so using this mode. In order to clear the
scanner's buffer, you must scan
Default = Batch Mode Off.
* Batch Mode Off
Inventory Batch Mode
3 - 16
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.
Transmit Inventory Records
Clear All Codes (see page 3-20).
(page 3-20). When the scanner's buffer space is full,
Automatic Batch Mode
Persistent Batch Mode