Code 11 - Honeywell 1602-B User Manual

Code 11

<Default All Code 11 Settings>
Code 11 On/Off
On
* Off
Check Digits Required
This option sets whether 1 or 2 check digits are required with Code 11 bar codes. Default = Two Check Digits.
One Check Digit
* Two Check Digits
Code 11 Message Length
Scan the bar codes below to change the message length. Refer to Message Length Description (page 7-2) for additional
information. Minimum and Maximum lengths = 1-80. Minimum Default = 4, Maximum Default = 80.
Minimum Message Length
Maximum Message Length
7 - 14
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.