Pairing The Scanner With An Apple Device Using Spp - Honeywell 1602-B User Manual

5
7
9
Your personal computer, laptop, tablet, or Apple device should now be paired with the scanner.
Once the scanner battery is charged and you have paired it, you may begin scanning bar codes. Verify the scanner operation
by scanning a bar code from the

Pairing the Scanner with an Apple Device Using SPP

Serial port protocol, or SPP, is used to establish two-way Bluetooth communication with the scanner. If you want to use an
Apple app or you are a developer creating an Apple app to communicate with the VG1602, use SPP to control the scanner
through that application. This feature is only available with Apple's MFI-certified devices. Consult Apple to determine if
your device is MFI-certified. Scan the bar code below to pair the Voyager 1602g with an Apple device using SPP.
Once the Apple device is connected to the Voyager 1602g using SPP, you must select the app that will be used to send
commands to and receive responses from the scanner. To disconnect the association between the scanner and the app,
use Bluetooth HID Keyboard Disconnect
1 - 4
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.
Sample Symbols in the back of this manual.
Pair with Apple Device
Using SPP
on page 3-1.
4
6
8
Save