Ncr Bioptic Aux Port Configuration; Wincor Nixdorf Terminal Default Settings; Wincor Nixdorf Beetle™ Terminal Default Settings - Honeywell 1602-B User Manual

NCR Bioptic Aux Port Configuration

This interface is only appropriate for an Access Point. Scan the following Plug and Play code to program the scanner for an
NCR bioptic scanner auxiliary port configuration, then power cycle the host. The following prefixes are programmed for
each symbology:

Wincor Nixdorf Terminal Default Settings

This interface is only appropriate for an Access Point. Scan the following Plug and Play code to program the scanner for a
Wincor Nixdorf terminal, then power cycle the host. This bar code sets the baud rate to 9600 bps and the data format to 8
data bits, no parity, 1 stop bit.
Wincor Nixdorf Beetle™ Terminal Default Settings
This interface is only appropriate for an Access Point. Scan the following Plug and Play code to program the scanner for a
Wincor Nixdorf Beetle terminal, then power cycle the host. The following prefixes are programmed for each symbology:
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.
Symbology Prefix
UPC-A A
UPC-E E0
EAN-8 FF
EAN-13 F
NCR Bioptic Settings
Wincor Nixdorf Terminal Settings
Symbology Prefix
Aztec Code V
Codabar N
Code 93 L
Code 128 K
Data Matrix R
EAN-8 B
EAN-13 A
GS1 DataBar E
GS1-128 P
Wincor Nixdorf Beetle Settings
Symbology Prefix
Interleaved 2 of 5 b
Code 128 f
Code 32 a
Pharmaceutical
(PARAF)
Code 39 a
Symbology Prefix
Interleaved 2 of 5 I
MaxiCode T
MicroPDF417 S
PDF417 Q
QR Code U
Straight 2 of 5 IATA H
UPC-A A0
UPC-E C
All other bar codes M
2 - 17