Chapter 3 - Wireless System Operation; Bluetooth Settings; Bluetooth Hid Keyboard Disconnect; Bluetooth Serial Port - Pcs/Laptops - Honeywell 1602-B User Manual

Wireless area-imaging pocket scanner
Table of Contents

Advertisement

3
Wireless System Operation
The VG1602g scanner can be used with Bluetooth devices such as personal computers, laptops, PDAs, and Honeywell mobility
systems devices.

Bluetooth Settings

Refer to
Pairing the Scanner with Bluetooth
following settings allow you to refine your Bluetooth connection.

Bluetooth HID Keyboard Disconnect

If your scanner has been connected directly to an iPad, smart phone, or laptop, you must disconnect it in order to commu-
nicate with a new host. Scan the Bluetooth HID Keyboard Disconnect bar code to unlink the scanner from the currently
linked host. Following the appropriate linking or pairing procedure to link the scanner to the new host.

Bluetooth Serial Port - PCs/Laptops

Scanning the Non-Base BT Connection bar code below unlinks your scanner and puts it into a discoverable state. Once
the scanner searches for and connects with a Bluetooth host, the scanner stores the connection to the host device address
and switches virtual COM ports. This allows the scanner to automatically relink to the host if the connection is lost.

PDAs/Mobility Systems Devices

You may also use the scanner with a PDA or a Honeywell Mobility Systems device. Scan the bar code below and follow the
instructions supplied with your Bluetooth device to locate and pair with the scanner.

Changing the Scanner's Bluetooth PIN Code

Some devices require a PIN code as part of the Bluetooth security features. Your scanner's default PIN is 1234, which you
may need to enter the first time you connect to your host. The PIN code must be between 1 and 16 characters. To change
the PIN for your scanner, scan the bar code below and then scan the appropriate numeric bar codes from the
Chart
inside the back cover of this manual. Scan Save to save your selection.
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.
®
Devices,
beginning on page 1-3, to link your scanner to a host via Bluetooth. The
Bluetooth HID Keyboard Disconnect
Non-Base BT Connection
BT Connection - PDA/Mobility Systems Device
Bluetooth PIN
Programming
3 - 1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Voyager 1602g

Table of Contents