Beeper Pitch - Error; Beeper Duration - Good Read; Led - Good Read - Honeywell 1602-B User Manual

High (4200 Hz)
Beeper Pitch – Error
The beeper pitch codes modify the pitch (frequency) of the sound the scanner emits when there is a bad read or error.
Default = Razz.
* Razz (250 Hz)
High (4200 Hz)
Beeper Duration – Good Read
The beeper duration codes modify the length of the beep the scanner emits on a good read. Default = Normal.
* Normal Beep
LED – Good Read
The LED indicator can be programmed On or Off in response to a good read. Default = On.
* LED - Good Read On
4 - 6
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.
Medium (3250 Hz)
Short Beep Short Beep
LED - Good Read Off