Scan Led Sequences And Meaning; Low Battery Indicator; Reset Scanner; Scanner Report - Honeywell 1602-B User Manual

Scan LED Sequences and Meaning

Low Battery Indicator

Battery LED

Reset Scanner

Scanning this bar code reboots the scanner and causes it to relink with the host.

Scanner Report

Scan the bar code below to generate a report for the connected scanners. The report indicates the port, work group, scanner
name, and address. To assign a name to your scanner, refer to
3 - 6
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.
LED Indication Beeper Indication
Normal Operation
Red flash None
Green flash 1 beep
Red, blinking Razz or error tone
Blue, off None
Blue flash None
Blue, on 1 beep
Menu Operation
Green flash 2 beeps
Red, blinking Razz or error tone
If your battery is low, the battery LED double flashes orange and the scanner double chirps. The
programmable button can also be set to display the battery charge level. See
Status on page 4-2.
Cause
Battery low
Successful scan
Failed communication
Bluetooth connection has not been
established
Scanner is attempting to pair with
Bluetooth device
Successful Bluetooth pairing
Successful menu change
Unsuccessful menu change
Reset Scanner
Menu Command Syntax, page 9-1.
Scanner Report
Battery Charge