Code 93 - Honeywell 1602-B User Manual

NEC 2 of 5 Message Length
Scan the bar codes below to change the message length. Refer to
information. Minimum and Maximum lengths = 2-80. Minimum Default = 4, Maximum Default = 80.
Minimum Message Length

Code 93

Code 93 On/Off
Code 93 Message Length
Scan the bar codes below to change the message length. Refer to
information. Minimum and Maximum lengths = 0-80. Minimum Default = 0, Maximum Default = 80.
Minimum Message Length
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.
< Default All Code 93 Settings >
* On
Message Length Description
Maximum Message Length
Message Length Description
Maximum Message Length
(page 7-2) for additional
Off
(page 7-2) for additional
7 - 9