Honeywell Fire-Lite Alarms MS-9050UD Manual page 173

Table 5.2 Format Selection Address Explanation
Where
SSS or SSSS =
A =
A2 =
Z =
RA =
RA2 =
TZ =
TZ2 =
RTZ =
RTZ2 =
TS =
TS2 =
RTS =
RTS2 =
DZ =
DZ2 =
RDZ =
RDZ2 =
L =
L2 =
RL =
RL2 =
P =
P2 =
RP =
RP2 =
FD =
FD2 =
RFD =
RFD2 =
V =
V2 =
RV =
RV2 =
X =
X2 =
Y =
7 =
8 =
9 =
A =
B =
C =
D =
E =
F =
UD =
UD2 =
Note: For Expanded Reporting, the control panel automatically adds the digit corresponding to the
zone number and the second digit corresponding to any system trouble condition. Only the first
digit is programmable.
MS-9050UD PN 52413:C 01/23/08
Subscriber ID
Alarm (1st digit)
Alarm (2nd digit)
Zone Number
Alarm Restore (1st digit)
Alarm Restore (2nd digit)
Zone Trouble (1st digit)
Zone Trouble (2nd digit)
Zone Trouble Restore (1st digit)
Zone Trouble Restore (2nd digit)
System Trouble (1st digit)
System Trouble (2nd digit)
System Trouble Restore (1st digit)
System Trouble Restore (2nd digit)
Zone Disable (1st digit)
Zone Disable (2nd digit)
Zone Disable Restore (1st digit)
Zone Disable Restore (2nd digit)
Low Battery (1st digit)
Low Battery (2nd digit)
Low Battery Restore (1st digit)
Low Battery Restore (2nd digit)
AC Loss (1st digit)
AC Loss (2nd digit)
AC Loss Restore (1st digit)
AC Loss Restore (2nd digit)
Fire Drill (1st digit)
Fire Drill (2nd digit)
Fire Drill Restore (1st digit)
Fire Drill Restore (2nd digit)
Supervisory Condition (1st digit)
Supervisory Condition (2nd digit)
Supervisory Condition Restore (1st digit)
Supervisory Condition Restore (2nd digit)
Test Report (1st digit)
Test Report (2nd digit)
A trouble corresponding to the following:
Ground Fault
Low Battery
not used
Telco Primary Line Fault
Telco Secondary Line Fault
Main Bell Fault, Annunciator Bell
Communication Fault to Primary Number
Communication Fault to Secondary Number
System Off Normal Fault/System Fault (Slave Operation, see Chapter 6)
Upload/download (1st digit)
Upload/download (2nd digit)
Central Station Communications
173