Nac; Relays - Honeywell Fire-Lite Alarms MS-9050UD Manual

Operating Instructions
READ STATUS

1=RELAYS

2=PROGRAM CHECK
3=HISTORY
Read Status Screen #3
164

4.22.6 NAC

Pressing 3 while viewing Read Status Screen #2 will display the following screen:
1=NAC 1
2=NAC 2
The operator can press 1 to view the programmed options for NAC 1 or 2 to view the programmed
options for NAC 2. The resulting screens will display the following information:
• Enable/Disable Status
• Circuit Type (Bell, Strobe, etc.)
• Silenceable/Nonsilenceable
• Auto Silence Enable/Disable and time delay (in minutes)
• Coding Selection (Temporal, Steady, etc.)
• Zone Assignments
• Silence Inhibit Enabled/Disabled
• Synchronization Type (System Sensor, Wheelock or Gentex)
4.22.7 Relays
Pressing 1 while viewing Read Status Screen #3 will display the following screen:
1=RELAY 1
2=RELAY 2
3=RELAY 3
The operator can view the programmed option for each relay by pressing the corresponding number
key.
NAC
RELAY
MS-9050UD PN 52413:C 01/23/08