1=STANDARD ADJECTIVE
2=STANDARD NOUN
3=CUSTOM ADJECTIVE
4=CUSTOM NOUN
Noun/Adjective Screen
**********************
1=NORTH
2=SOUTH
3=EAST
**********************
1=WEST
2=FRONT
3=CENTER
**********************
1=REAR
2=UPPER
3=LOWER
**********************
1=MAIN
2=FIRST
3=2ND
MS-9050UD PN 52413:C 01/23/08
Pressing 1 while viewing the Noun/Adjective Screen will cause the following screen(s) to be
displayed. Note that the keyboard down arrow key must be pressed to see all the Adjective
screens. Press the number corresponding to the adjective that is to be used as a descriptor for
the location of the control module currently being programmed.
Adjective Screen #1
Adjective Screen #2
Adjective Screen #3
Adjective Screen #4
**********************
1=3RD
2=4TH
3=5TH
Adjective Screen #5
**********************
1=FLOOR 1
2=FLOOR 2
3=FLOOR 3
Adjective Screen #6
**********************
1=FLOOR 4
2=FLOOR 5
3=ROOM
Adjective Screen #7
Programming
81