Programming
PROGRAMMING
1=AUTOPROGRAM
2=POINT PROGRAM
3=ZONE SETUP
Programming Screen #2
ZONE SETUP
1=ENABLE
2=DISABLE
3=ZONE 17 18 19
Zone Setup Screen #1
84
3.6.3 Zone Setup
Pressing 3 while viewing Programming Screen #2 will access the Zone Setup screens as illustrated
below:
1=ENABLE
2=DISABLE
3=ZONE 17 18 19
1=ZONES INSTALLED
2=ZONES ENABLED
3=ZONES DISABLED
1=ZONE TYPES
2=ZONES AVAILABLE
3=FUTURE USE
3.6.3.1 Enable
Pressing 1 for Enable, while viewing Zone Setup Screen #1, will display the following screen:
Z
This screens allows the programmer to enable zones, one at a time. A flashing cursor appears
next to the Z, prompting the programmer to enter a two digit zone number (01 - 19). When the
second digit is entered, the zone will be enabled and the cursor returns to the original position
next to the Z. Another zone can then be enabled.
ZONE SETUP
Zone Setup Screen #1
ZONE SETUP
Zone Setup Screen #2
ZONE SETUP
Zone Setup Screen #3
ZONE TO ENABLE
Enable Screen
MS-9050UD PN 52413:C 01/23/08