Function Groups First Operating Level - GE USM 36 Series Technical Reference And Operating Manual

Overview of the functions

Function groups first operating level

RANGE This is where you will find functions required for the basic setting of the signal representation on the
display screen.
PULSER This group is a combination of functions used for setting the pulser.
RECEIVER This group is a combination of functions used for setting the receiver.
dB REF This group contains functions for evaluation. The name and functions of this group vary depending
on the selected evaluation method.
AUTOCAL This is where you will find the functions for the semi-automatic calibration of the instrument.
GATE A In this group, you will find all functions required for setting the gate A.
GATE B In this group, you will find all functions required for setting the gate B.
GATES Only if the option 3B is enabled: All functions for setting the gates A, B, and C.
The function groups GATE A and GATE B are then no longer visible.
USM 36 Issue 2 (12/2013)
5 Operation
5-3