Configuring The Usm 36 For; Tof Mode - GE USM 36 Series Technical Reference And Operating Manual

5 Operation
5.15 Configuring the USM 36 for test
tasks
Besides the default settings for the instrument opera-
tion, you have to configure the USM 36 for calibration
and test tasks. You will find functions for this purpose
primarily in the function groups EVAL, CONFIG1, and
CONFIG2 on the second operating level.
You will find the function TOF MODE in the function
groups GATE A and GATE B on the first operating lev-
el.
Moreover, you have to check and, if necessary, correct
the current date and time so that this information is
stored correctly together with the test results.
5-52

TOF MODE

The sound path measurement by means of the echo
evaluation depends on the choice of the measuring
point.
Issue 2 (12/2013)
Configuring the USM 36 for test tasks
USM 36