Units Setting; Decimal Separator - GE USM 36 Series Technical Reference And Operating Manual

4 Principles of operation

Units setting

You can use the function UNITS (function group CON-
FIG1 on the second operating level) to select the re-
quired units (mm, in, or µs). You can change the units
any time. All values are adjusted accordingly.
– Switch to the second operating level.
– In the function group CONFIG1, select the function
UNITS.
– Select the required units.
4-14

Decimal separator

You can choose the decimal separator mark. All data
are displayed and saved using the selected decimal
separator.
– Switch to the second operating level.
– In the function group CONFIG1, select the function
DECIMAL.
– Select the required decimal separator.
Issue 2 (12/2013)
Important default settings
USM 36