Setting The Brightness - GE USM 36 Series Technical Reference And Operating Manual

4 Principles of operation

Setting the brightness

To set the brightness of the display, use the function
BRIGHTNESS (function group CONFIG1 on the second
operating level). You can choose a value from 1 to 10.
N o t e
Change to the higher brightness value re-
duces the time in battery operation.
4-18
– Switch to the second operating level.
– In the function group CONFIG1, select the function
BRIGHTNESS.
– Choose the required value.
N o t e
You can extend the operating time by means
of the power saver function (see Section
Power saving mode, page 5-79).
Issue 2 (12/2013)
Default settings of the display
USM 36