Selecting The A-Scan Color; Selecting The Grid - GE USM 36 Series Technical Reference And Operating Manual

Default settings of the display

Selecting the A-scan color

You can choose the color of the A-scan using the function
A-SCAN COLOR (function group CONFIG2 on the sec-
ond operating level). The color options depend on the se-
lected color scheme (see Section Selecting the color
scheme, page 4-16).
– Switch to the second operating level.
– In the function group CONFIG2, select the function
A-SCAN COLOR.
– Choose the required color for the A-scan.
USM 36

Selecting the grid

Using the function GRID (function group CONFIG1 on
the second operating level), you can choose a grid for
the A-scan. Two grids, each with and without a ruler at
the bottom edge of the display, are available as options.
– Switch to the second operating level.
– In the function group CONFIG1, select the function
GRID.
– Choose the required grid for the A-scan.
Issue 2 (12/2013)
4 Principles of operation
4-17