Gate Logic - GE USM 36 Series Technical Reference And Operating Manual

5 Operation

Gate logic

You can use the functions GATE A LOGIC and
GATE B LOGIC to set the criteria for triggering a gate
alarm.
N o t e
For the configuration of the alarm output, see
Section Configuring the alarm output,
page 5-76.
5-74
The following settings are available:
● OFF
The gate is turned off, alarms and measurement
functions are disabled, and the gate is not visible on
the display screen.
● POSITIVE
The alarm is triggered if the gate is exceeded.
● NEGATIVE
The alarm is triggered if the gate is not reached.
– Switch to the second operating level.
– Select the function group CONFIG2.
– Select the function GATE A LOGIC and choose the
setting for the gate A.
– Switch to the function GATE B LOGIC and choose
the setting for the gate B.
Issue 2 (12/2013)
General setup
USM 36