Configuring The Measurement Line - GE USM 36 Series Technical Reference And Operating Manual

5 Operation

Configuring the measurement line

You can configure the individual items of the measure-
ment line by means of the functions READING 1 to
READING 6 of the function group EVAL, i.e. you can
choose the reading and the possible position at which it
should be directly displayed during the test.
5-58
N o t e
As an alternative to a reading, you can dis-
play the virtual alarm LED (see Section
LARGE (alarm signal), page 5-64) or the
dataset name (see Section Displaying data-
set name, page 4-22) in the large box on the
far right.
The following readings are selectable:
A%A Echo height in gate A in % screen height
A%B Echo height in gate B in % screen height
A%C Echo height in gate C in % screen height
SA Sound path for gate A
SB Sound path for gate B
SC Sound path for gate C
Issue 2 (12/2013)
Configuring the USM 36 for test tasks
USM 36