Power Saving Mode - GE USM 36 Series Technical Reference And Operating Manual

General setup

Power saving mode

You can use the function POWER SAVER to increase
the operating time of the battery by setting a time after
which the display screen is automatically turned off if the
instrument is not used during this time.
The display screen is automatically turned on again as
soon as you use a control element.
USM 36
You can define the turn-off time within the range of
1 ... 30 minutes.
– Switch to the second operating level.
– Select the function group CONFIG3.
– Select the function POWER SAVER.
– Select the required setting.
Issue 2 (12/2013)
5 Operation
5-79