Configuring the USM 36 for test tasks
MAGNIFY GATE (spanning the gate)
The setting of the function MAGNIFY GATE causes the
selected gate to span over the entire displayed range.
You can choose a gate for the magnify gate function.
USM 36
– Switch to the second operating level.
– Select the function group EVAL.
– Select the function MAGNIFY GATE to choose the
gate for this function.
– Select the required gate.
N o t e
In order to use the magnify gate function, the
function MAGNIFY GATE must be assigned
to one of the function keys (see Section Ac-
tivating the magnify gate function,
page 5-66).
Issue 2 (12/2013)
5 Operation
5-65