Operation Using A Battery - GE USM 36 Series Technical Reference And Operating Manual

3 Initial start-up

Operation using a battery

You should only use the supplied lithium-ion battery for
the battery operation.
Inserting batteries
The battery compartment is located on the rear of the in-
strument. The cover is fastened with two locks.
– Press the two locks (1) of the battery compartment
downwards to open them.
– Lift the cover off upward. In the open battery compart-
ment, you will see several connector pins (2) on the
right.
3-4 Issue 2 (12/2013)
Power supply
1
2
USM 36