Activating The Magnify Gate Function - GE USM 36 Series Technical Reference And Operating Manual

5 Operation

Activating the magnify gate function

To be able to use the magnify gate function for spanning
a gate over the entire displayed range you must config-
ure one of the function keys accordingly.
Besides this, the gate must be broad enough, otherwise
an error message is given.
5-66
N o t e
In order to use the magnify gate function, a
gate must be chosen for it (see Section
MAGNIFY GATE (spanning the gate),
page 5-65).
– Switch to the second operating level.
– Select the function group CONFIG3.
– For example, select the function FUNCTION 1 in or-
der to use the function key F1 for the magnify gate
function.
– Select the function MAGNIFY GATE.
– Switch to the first operating level and briefly press the
function key F1. The gate is displayed over the entire
range.
Issue 2 (12/2013)
Configuring the USM 36 for test tasks
USM 36