Configuring The Alarm Output - GE USM 36 Series Technical Reference And Operating Manual

5 Operation

Configuring the alarm output

You can configure the alarm output of the service inter-
face (see Chapter 8.1 Interfaces, page 8-2). This en-
ables you to define the criteria for the gate alarm output.
5-76
The settings for VIRTUAL LED and OUTPUT SELECT
are logically dependent in the operation of the gates A
and B, however, the gate polarity can be set inde-
pendently:
● for the VIRTUAL LED by means of GATE A LOGIC
and GATE B LOGIC and
● for OUTPUT SELECT A and OUTPUT SELECT B by
means of (+) and (-).
The optional gate C is excluded in this connection.
Issue 2 (12/2013)
General setup
USM 36