Inserting The Sd Memory Card - GE USM 36 Series Technical Reference And Operating Manual

3 Initial start-up

3.4 Inserting the SD memory card

You can use any standard SD memory card in the
USM 36.
– Loosen the knurled screw (1) and remove the cover.
– Insert the SD memory card into the card slot (2) so
that the contacts of the card face the instrument rear
panel.
– Press the card down into the card slot until it locks
into place.
– Close the cover and lock it by means of the knurled
screw.
– To remove the SD card, open the cover and shortly
press down the card to unlock it.
3-10 Issue 2 (12/2013)
Inserting the SD memory card
1
2
USM 36