Important default settings
Date format, Date, and Time
The date is saved together with the inspection results.
You can set the date format, the date, and the time us-
ing the corresponding functions of the function group
CONFIG1 on the second operating level.
A T T E N T I O N
Always ensure that you are using the correct
date and time for documentation purposes.
Remember to adjust accordingly for Daylight
Savings.
USM 36
– Switch to the second operating level.
– In the function group CONFIG1, select the function
DATE FORMAT.
– Select the required date format. The time format is
changed together with the date format.
– Select the function DATE.
– Use the arrow keys Right and Left to change be-
tween day, month, and year.
– Change the setting by means of the arrow keys Up
and Down.
– Select the function TIME.
– Change the time in the same way as you did previ-
ously for the date. The new values apply immediately.
Issue 2 (12/2013)
4 Principles of operation
4-15