Table of Contents
Advertisement
Lift and Support Points
Lift and Safety Stands
When heavy rear components
such
as
suspension,
fuel
tank,
spare tire and tailgate
Bre
to be removed, place
additional weight in the
trunk
before
hoisting.
When
substantial
weight is removed from
the
fBar
of the
vehicle,
the
center of gravity may change and
can cause
the vehicle to tip forward on the
hoist.
NOTE:
Since each tire/wheel assembly weighs approximately 30 Ibs
(14
kg), placing the front wheels in the cargo area can
assist
with
weight distribution.
1.
Place
the lift blocks as
shown.
2.
Raise
the hoist a few inches (centimeters). and rock the vehicle to be sure
it
is firmly supported.
3. Raise the
hoist
to full
height,
and inspect the lift points for
solid support.
NOTE:
Use
the
same
support
points
to support the vehicle on safety stands.
FRONT SUPPORT POINT
UFTBLOCKS
REAR SUPPORT POINT
1-19
Advertisement
Table of Contents
Troubleshooting
