Power Steering Gearbox - Honda CR-V 1997 Service Manual

Power Steering Gearbox
Removal (cont'd)
14. Loosen the 14 mm flare nu t, and disconnect the
pump outlet hose.
ADJUSTABlE HOSE CLAMP
RETURN HOSE
RETURN HOSE JOINT:
16 mm FLARE NUT
14
mm
FLARE NUT
15. Loosen th e adjustable hose clamp and disconnect
th e return hose.
16. Loosen the 16 rnm flare nut, and remove th e return
hose joint.
17. After disconnecting the hoses and lines, plug or seal
them with a piece of tape or equivalent to prevent
foreign materials from entering the valve body unit.
NOTE:
• Do not loosen the cylinder line A and B between
the valve body unit and cylinder.
• With 2WD, continue to step 23.
17-32
4WD: Steps 18·22
18. Remove th e right fro nt mount, then apply vinyl tape
to the side frame to protect it from the transmission
cover and stop bolt.
12
x
1.25
mm
Vinyl tape or
equivalent material.
10x 1.25 mm
19. Remove the left front mount, then apply vinyl tape
to the side frame to protect it from the stop bolt.
LEFT FRONT MOUNT
SIDE FRAME
~
Vinyl tape or
equivalent mate ri al .
STOP BOLT
12 x 1.25 mm
Replace.
10 x 1.25
mm