Honda CR-V 1997 Service Manual page 790

Shift Cable
Replacement (cont'd)
7. Remove the nuts securing the shift cable holder,
then remove the shift cable.
GROMMET STUD BOLT
SHIFT CABLE
~
6x1.0mm
~
12 N'm 11 .2 kgf·m.
8.7 Ibf.ft,
8. Install the shift cable in the reverse order of the
removal.
NOTE:
• Do not bent the shift cable excessively when
installing it.
• Make sure the lock pin is seated securely in the
cable adjuster.
• Replace the lock pin if it does not snap over the
cable adjuster securely.
9. Check the cable adjustment after installing it.
14-274