Honda CR-V 1997 Service Manual page 134

23. Remove the intake manifold mounting bolts and
water bypass hose.
8x1 .25mm
24 N·m 12.4 kgf·m.
17 Ibf.ftJ
24. Loosen the locknuts and adjusting screws.
INTAKE
No.4 No.3
No.2 No.1
No. 4
No.3
No.2 No.1
EXHAUST
25. Remove the camshaft holder bolts, then remove the
camshaft holders and rocker arms. Make note of the
rocker arm positions.
ROCKER ARM
26. Remove the cylinder head bolts . To prevent
warpage, unscrew the bolts in sequence 1/3 turn at a
time; repeat the sequence until all bolts are loosened.
CYLINDER HEAD BOLTS LOOSENING SEQUENCE:
@
®
(j)
27. Remove the cylinder head.
6-21