Rear Bumper Removal And Installation - Honda CR-V 1997 Service Manual

Bumpers
Rear Bumper Removal and Installation
CAUTION: Put on gloves to protect your hands.
NOTE:
• An assistant is helpful when removing the rear bumper .
• Take care not to scratch the rear bumper and body.
~: Bolt. screw locations
A~,2 B~,4
C~, 10
t>:
Clip loeations, 7
•
~ 6X1.0mm ~I ~
_
. _ _ 9.8N.m 1 ' . - - . J ,Okgf.m, , ... ,
. 7.2 Ibf.ft)
'='
SIDE MARKER
LIGHT CONNECTOR
Disconnect.
/
REAR SPLASH
GUARD
SIDE MARKER
LIGHT
Installation is the reverse of the removal procedure.
NOTE :
• If necessary, repla ce any damaged clips.
ABSORBER
• Make sure the side marker light connectors are plugged in properly.
• Make sure the rear bumper engages the side clips on each side securely.
20-74
REAR BUMPER
STEP
A
SIDE MARKER
LIGHT CONNECTOR
Disconnect.
REAR SPLASH
GUARD
SlOE
MARKER
LIGHT
A
REAR BUMPER