Rear Bumper Removal/Installation - Honda 2004 Odyssey Service Manual

Bumpers

Rear Bumper Removal/Installation

NOTE:
• Have an assistant help you when removing the rear bumper.
• Take care not to scratch the rear bumper and body.
• Put on gloves to protect your hands.
1. Remove the taillights (see page 22-132).
2. Remove the rear bumper (A):
–1 Pry out the caps (B), and remove the bolts (C) from each side.
–2 Remove the screws (D) securing the rear bumper and rear clip (E) from each side.
–3 Remove the screws (F) and clips (G) securing the bumper to the body.
–4 With the help of an assistant, pull both side wheel arch portions of the bumper outward to detach the side
clips (H), and pull them forward to detach the clips (I).
–5 Remove the rear bumper from the hooks (J) and rear clips (E) by pu lling it rearward.
Fastener Locations
C : Bolt, 4
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
E
H
3. If necessary, detach the rear bumper step (K).
20-130
D : Screw, 2 F : Screw, 2
J
D
I
F
A
G : Clip, 8 I : Clip, 2
B
F
I
C G
G
G
C
G
G
B
G
J
K
D
C
G
G
C
B