Heater Control Panel; Blower Unit; Replacement - Honda CR-V 1997 Service Manual

Heater Control Panel
Replacement
1. Remove the center panel together with the heater
control panel and the audio unit (see section 20).
2. Remove the self·tapping screws and the heater con-
trol panel from the center panel.
HEATER CONTROL PANEL
CENTER PANEL
3. Install in the reverse order of removal.
22-46
Blower Unit
Replacement
, . Remove the evaporator Isee page 22-48).
2. Disconnect the connectors from the blower motor,
the blower motor high relay, the power transistor
and the recirculation control motor. Remove the
wire harness clip from the recirculation control
motor, and release the wire harness from the clamp
on the blower unit. Remove the mounting bolts, the
mounting nut and the blower unit.
6x 1.0mm
9.8 Nom 11.0 kg/·m. 7.2 Ibf.ftl
/
BLOWER UNIT
3. Install in the reverse order of removal. Make sure
that there is no air leakage.