Removal/Installation - Honda Acura NSX 1991 Service Manual

Clutch Master Cylinder (CANADA)

Removal/Installation

1 . Pry out the cotter pin, and pull the pedal pin out of
the yoke.
COTTER PIN
Replace
PEDAL PIN
12-8
2. Remove the nuts and bolts attaching the master
cylinder and remove the cylinder from the engine
compartment.
3.
Remove the clutch pipe and reservoir hose from the
master cylinder.
CAUTION:
damage the finish.
hose with a shop towel prevent fluid from flow-
ing out of the clutch pipe and reservoir hose
after disconnecting.
22 Nom (2.2 kg-m, 16 lb-W
RESERVOIR
\ \
CLUTCH PIPE
ASSEMBLY
4. Install the clutch master cylinder in the reverse
order of removal.
NOTE: Bleed the clutch hydraulic system (page
1 2 - 1 1 ) .
6x l.Omm
10 N*m (1.0 kg-m,
8 lb-t31
I'
HOSE
CYLINDER