Rear Wheel Removal; Rear Wheel Installation; Rear Wheel Hub/Knuckle Removal - Honda MUV700 big red Service Manual

REAR WHEEL
REMOVAL
Loosen the wheel nuts.
Raise the rear wheels off the ground (page 1-48).
Remove the nuts and wheel.
For tire remova l/installation and repair, see Front
Wheel/Suspension section (page 15-6).
INSTALLATION
Clean the mating surfaces of the wheel and hub
thorough ly.
Install the wheel and the nuts with the tapered side
facing inward, and tighten them .
TORQUE: 108 N'm 111.0 kgf·m, 80 IbUt)
REAR WHEEL HUB/KNUCKLE
REMOVAL
Remove the rear wheel (page 17-5),
Remove the following :
- brake hose clamp bolt
Suppon the caliper -
two mounting bolts and brake caliper
so
that II
does not
hang from the
brake hose.
Do nor
tWist or bend the
brake hos e
REAR WHEEL/SUSPENSION
17-5