Clutch Overhaul - Honda CR-V 1997 Service Manual

Compressor
Clutch Overhaul
1. Remove the center nut while holding the armature
plate with the tool.
AIC CLUTCH HOLDER
(Commercially available)
Roblnair: PIN 10204
Kent.Moor.: PIN J37872
CENTER NUT
17.6 N'm 11.8 kgf·m, 131b,",'1
Replace.
2. Remove the armature plate by pulling it up by hand.
ARMATURE PLATE
22-66
3. Remove the snap ring B with snap ring pliers. Be
careful not to damage the rotor pulley and com-
pressor.
o
SNAP RING B
4. Remove the rotor pulley from the shaft with the
tools. Be sure the claws of the puller are on the back
of the rotor pulley, not on the belt area; otherwise
the rotor pulley can be damaged.
PULLER
(Commercially available'
DRIVER AnrACHMIEN1',
07947 - 6340300