Canon 1130 Service Manual page 868

Projector-Related Items
Although the CLC1100/1140/1160/1180 also indicates this mode item, its
selection is not valid for the model.
REF.
Level 3
DS-PRJ Use it to adjust the slice level for projection area
detection with the projector in use.
DS-OHP Use it to adjust the slice level for original detection
in reference to the reference sheet of film (e.g., 6x6,
8x10) placed on the copyboard glass with the
projector in use.
RD-XS Use it to adjust the read area when the original
RD-XE detection mechanism is off or when original
RD-YS detection fails even when the original detection
RD-YE mechanism is on with the projector in use.
DA-XS Use it to adjust the read area when the original
DA-XE detection mechanism is on with the projector in use.
DA-YS • This is also used for the read area when the
DA-YE original detection mechanism is off in copyboard
mode.
COPYRIGHT © 2002 CANON INC.
Description
Figure 13-716
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
Remarks
0 to 31
Standard: 28
0 to 31
Standard: 22
-300 to +300
Unit: 0.06 mm
Standard: 0
-99 to +99
Standard: 0
XS, XE
Unit: 0.11 mm
YS, YE
Unit: 0.06 mm
PRJ>ADJUST
13-279