Removing The Transfer; Drum Cleaner Assembly; Filter; Applying Lubricant To The Transfer Drum Cleaner - Canon 1130 Service Manual

4) Remove the two screws [3], and detach
the scraper (upper, lower) [4].
4. Removing the Transfer Drum
Cleaner Assembly Filter
1) Remove the transfer cleaner unit.
2) Lift the rail guide plate [1].
3) Remove the screw [2], and detach the
filter cover [3].
4) Remove the filter.
5. Applying Lubricant to the Transfer
Drum Cleaner
1) Use a specific lubricant (e.g., FY9-6006).
2) Put a drop of lubricant (one drop each) at
points indicated (A).
3) Turn the gear several times by hand so
that the lubricant spreads inside the
bushing.
4) Put another drop (one each) once again,
and repeat step 3.
5) When all amounts of lubricant have
spread to the inside of the bushing, wipe
the excess lubricant with lint-free paper
(indicated by dashed lines).
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 PICK-UP / FEEDING SYSTEM
Figure 7-837
Figure 7-838
Figure 7-838a
[3]
[4]
[1]
[3] [2]
A
A
7-87