Canon 1130 Service Manual page 501

CHAPTER 11 INSTALLATION
7) Detach the two pins taped to the skid, and
arrange the slope plates, and secure them
in place with the pins. Be sure that each
slope plate is placed so that the boss at the
center faces down.
8) Slide down the copier from the skid.
(Position one person to support from below
while the other pushes from above.)
9) Open the cardboard box, and take out the
parts and materials.
Check to make sure that all
attachments are available.
11-6
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
Pin
Figure 11-204
Slope plate